Directional Boring Somerton Verified listing

Directional Boring in Somerton by DEVCO Development and Engineering

DEVCO Development and Engineering provides professional directional boring services in Somerton and across Yuma County for homeowners, farmers, utilities, and contractors. We install underground pipes and conduits without open trenching, so driveways, streets, and landscaping stay largely intact. Our crews use guided boring equipment to place water, sewer, electrical, and communication lines on-grade and in the right location.

Straight talk: what directional boring actually is

Directional boring, also called horizontal directional drilling, is a trenchless method to install underground utilities. Instead of digging a long open trench, we drill a guided path from a small entry pit to a small exit pit, then pull the pipe or conduit back through that path.

In Somerton, this works well in busy neighborhoods, along farm access roads, and near existing utilities where open cuts would be messy, slow, or just not allowed. We routinely bore for water services, sewer laterals, power and communication conduits, irrigation lines, and sleeves for future utilities.

Directional boring under driveways and other hard surfaces

Breaking out a good driveway just to run one new line doesn’t make much sense. That’s where directional boring under driveways really shines. We can start on one side of the concrete, asphalt, or pavers, drill under, and come out on the other side with almost no surface disruption.

If you’re searching for Directional boring under driveways Somerton, you’re usually trying to avoid sawcut lines, settlement cracks, and weeks of patchwork. With boring, most driveway crossings are done in a day, and you can typically use the driveway again right after we leave.

• Install new water or sewer services without cutting the street or driveway
• Add electrical and communication conduits to shops, ADUs, and farm buildings
• Route irrigation lines beneath roads, ditches, or concrete pads
• Create sleeves for future utilities so you only dig once

How our directional boring process works

Every job in Yuma County starts with a site walk. We look at access, surface improvements, possible utility conflicts, and where you want the new line to start and end. We also coordinate utility locates so we know what’s already in the ground.

On boring day, we set up the drill, dig small entry and exit pits, and use a guided drill head with a locator to steer the bore. We watch depth and grade constantly, which is important for gravity sewer and drainage lines. After the pilot hole is complete, we ream it to size and pull in the pipe or conduit. Then we connect your line, pressure test or camera it if needed, backfill the pits, and clean up.

What you should know before starting

Directional boring is flexible, but there are still a few things to think through ahead of time:

Know roughly where you want the new line to run and where it will connect. Clear vehicles, debris, and loose items from work areas. If permits or city approvals are required for work in the public right-of-way, we’ll discuss that early so it doesn’t slow your schedule.

Why experience matters in Directional Boring Somerton

On paper, directional boring looks simple. In the field, it’s easy to get off line, come up shallow, or cross another utility if the crew isn’t paying attention. Experienced boring contractors plan their shots, read the locator correctly, and know how local soils behave when drilled and back-reamed.

As a DVBE (Disabled Veteran Business Enterprise) and certified SDVOSB, PDBE, SB-Micro, and SB-PW firm, we’re used to working under strict quality and documentation requirements. That same discipline carries over to private residential, agricultural, and commercial work—accurate depths, clean bores, and straightforward communication.

What does directional boring cost?

Pricing depends on bore length, pipe size, soil conditions, and how many crossings or tie-ins are involved. For a deeper explanation of the main cost drivers, you can review this overview of directional boring cost and what affects it. We’re happy to talk through your specific run and provide a written quote.

Common questions about our boring service

Will directional boring tear up my yard?
You’ll see disturbed soil at the entry and exit pits and where we tie into existing utilities, but the area between stays intact. Compared to open trenching, there’s far less landscape restoration and almost no impact to driveways or sidewalks.

How long does a typical residential bore take?
Most short residential bores—like a new service line across the front yard or under a driveway—take less than a day in the field once utility locates are complete. Longer street or commercial crossings can take more time, especially if we’re installing multiple conduits.

Let’s talk about your Somerton boring project

If you’re planning new utilities and want to avoid cutting concrete, tearing up landscaping, or closing drive lanes, directional boring may be the right approach. Call DEVCO Development and Engineering at (951) 221-3633 or email info@devco-inc.com and we’ll walk you through options, feasibility, and next steps for your project in Somerton or anywhere in Yuma County.