Pipe Bursting Glendale Verified listing

Pipe Bursting in Glendale by DEVCO Development and Engineering

We provide trenchless pipe bursting services in Glendale and across Maricopa County for homeowners, HOAs, commercial properties, and public agencies that need failing sewer or water lines replaced. Pipe bursting lets us install a new, durable pipe along the old pipe’s path with only small access pits, using a powered bursting head to break the existing line while pulling in the new one.

What Pipe Bursting Actually Does

Pipe bursting is a trenchless replacement method. Instead of digging up the whole run of pipe, we break the old pipe underground and pull a new pipe into the same alignment.

On a typical job, we dig a small entry pit and an exit pit, feed a bursting head through the existing line, and use hydraulic power to fracture the old pipe while a new HDPE or fusible PVC pipe follows right behind.

When Pipe Bursting Makes Sense in Glendale

In many Glendale neighborhoods and commercial areas, pipe bursting is ideal when open trenching would tear up driveways, parking lots, mature landscaping, or busy streets.

Common situations where we use Pipe Bursting Glendale projects include:

• Old clay or cast iron sewer laterals that are cracked, offset, or full of root intrusions
• Undersized lines that need upsizing for added units or higher flow
• Pipes running under patios, additions, or finished hardscape
• Utility replacements in tight access areas or active commercial sites

How the Pipe Bursting Process Works

Every site is different, but the core steps are similar:

First we locate and CCTV-inspect the existing line so we know its size, material, depth, and any bends. Then we plan entry and exit pits to avoid utilities and minimize disruption. Small excavators or vacuum excavation open those pits instead of a long trench.

A steel cable or rod is fed through the old pipe. The bursting head connects to the front of the new pipe and to the cable. Our hydraulic unit then pulls the head through, breaking the old pipe outward as the new pipe slides into place. Finally, we reconnect to existing systems and perform pressure or flow testing.

Why Owners Choose Pipe Bursting

For many Glendale and Maricopa County sites, pipe bursting is chosen because it:

• Reduces surface demolition and restoration
• Often shortens total project duration
• Allows upsizing the line in many cases
• Installs a new, seamless pipe with fewer joints
• Can be done in tight or developed areas where trenching isn’t realistic

Picking a Pipe Bursting Contractor in Glendale

A good pipe bursting contractor Glendale projects rely on will focus on investigation and setup, not just the pull itself. Inexperienced crews often skip thorough locating, ignore existing bends, or choose the wrong bursting head size, which can lead to heaves, utility conflicts, or an incomplete burst.

At DEVCO Development and Engineering, our underground utilities team brings structured planning, detailed documentation, and field-tested procedures. Our DVBE, SDVOSB, PDBE, SB-Micro, and SB-PW classifications reflect the level of professionalism we maintain on both private and public work.

What should I know about cost?

Costs vary with depth, access, pipe size, and how much surface restoration is involved. To help with early budgeting, we’ve outlined typical factors that influence the cost of pipe bursting and what drives it up or down. From there, we can refine pricing once we review your plans or inspect the existing line.

Will my yard or parking lot be destroyed?

No, that’s the main benefit of pipe bursting. You’ll still see small pits at each end and at any required tie-in points, but we’re not digging a continuous trench through your property. We plan pit locations to protect high-value areas as much as possible.

Let’s Talk About Your Line Replacement

If you’re dealing with recurring backups, broken sewer laterals, or aging water lines and want to know if pipe bursting is a fit, we’re happy to walk you through options in plain language. Call DEVCO Development and Engineering at (951) 221-3633 or email info@devco-inc.com to discuss your Glendale project or request a detailed quote.